The Neurotrac Myoplus 2 Pro electrostimulator is preconfigured for incontinence treatments, sports development, muscle development and neuromuscular rehabilitation.

Features:

- New and improved full color touch screen. The new interface is easy to use, provides all the necessary explanations to operate the unit and allows interactive learning anywhere, from how to place the electrodes to running EMG graphs and many other useful tools.

- Specially designed to serve as a portable device for physiotherapists.

Suitable for personal training in a clinic or at home (with advice).

- 2 EMG channels (biofeedback) combined with 2 NMES channels (stimulation).

- 2 channels of ETS (EMG induced stimulation) with stimulation on 2 channels.

- Simple single or multi-phase operation: multi-phase allows combining EMG/ETS/STIM in a single program.

- Multilingual TFT screen and voice prompts for EMG biofeedback.

- Manual and automatic threshold control.

- Biological feedback between stimulation (indication of fatigue and muscle activity when muscle stimulation is used).

- Standalone device that can also be used with established multilingual programs.

- Now with Bluetooth connectivity! The unit sends up to 10 meters of wireless data to the software.

- For home users: generates and prints (with the optional software) exhaustive daily reports on the patient's progress, offering readings (2 channels) of activity/rest averages, maximum values, start and relaxation times. muscle contraction, activity and rest deviations, and average mA current.

- It serves as a learning tool for both the patient and the clinical professional, emphasizing the improvement of therapeutic techniques during the use of EMG and neuromuscular stimulation.

- 4 AA batteries (no mains connection required).

- Model number: MYO220P.

Specifications:

EMG

- Dual channel EMG

- EMG range: 0.2 to 2000 μV RMS (extended)

- Sensitivity: 0.1 μV RMS

- Accuracy: 4% μV indications +/-0.3 μV at 200 Hz

- Band selective filter: band width 3 dB, Cophase signal reduction coefficient: 130 dB minimum @ 50 Hz

- to. Wide: 18 Hz +/- 4 Hz up to 370 Hz +/- 10% of rates under 235 microvolts. 10 Hz +/-3 Hz up to 370 Hz +/- 10% of ratings above 235 microvolts

-b. Narrow: 100 Hz +/- 5% up to 370 Hz +/- 10%

- 1.5 Notch Filter: 50 Hz (for Canada – 60 Hz) - 33 dB (0.1% accuracy)

- Work/rest periods: 2-99 seconds

- Number of trials: 1-99

STIM

- Channel stimulator.

 - Amplitude: 0-90 mA in case of 500 ohm load - real mA will be lower than indicated by electrode impedance:

In case of 1000 ohms of load (electrodes in poor condition) the maximum value will be limited by 75 mA, in case of 1500 ohms of load the maximum value will be limited by 50 mA.

- Type: constant current, maximum output voltage 70 Volts +5/ -10 Volts.

- Wave type: symmetrical, rectangular, biphasic with zero electrical average of constant current

- Selectable pulse width: 50-450 μs (2% accuracy)

- Pulse frequency selection: 2-100 Hz (2% accuracy)

- Work/rest periods: 2-99 seconds

- Time from 1 to 99 minutes

- Linear acceleration time: 0.1 to 9.9 seconds

- Present and scheduled treatment programs

- Automatic output disconnection with determination of the open electrode 0.5 mA.

Batteries: 4 x AA. Low charge indication at 5.4 volts +/- 0.2 volts, automatic shutdown when voltage is lower than low charge indication.

Change batteries immediately! 

The device automatically turns off when not in use (energy saving): for example, if you are configuring parameters and no button is pressed for one minute, when it is in stimulation mode (home screen) and all channels show 0 mA.

Estimated average battery life (800 mAh standard, alkaline):

to. MyoPlus2 Pro:    12 to 16 hours in STIM mode, 25 hours in EMG mode.

b. MyoPlus4 Pro:    8 to 16 hours in STIM mode, 25 hours in EMG mode.

Environmental conditions for use:

From +10 to +30 degrees Celsius. Humidity from 0-90%.

Storage and transportation conditions:

From -10 to +50 degrees Celsius. 0-90% Humidity.

Physical dimensions:

Dimensions: Length 150 mm, width 89 mm, depth 35 mm

Weight:

MyoPlus2 unit: 0.16 kg (without battery)

Programs:

Pelvic Floor (19):

P1 - Pelvic pain

P2 - Urge incontinence 1

P3 - Stress Incontinence 1

P4 - Stress Incontinence 2

P5 - Frequency / Urgency 1

P6 - Frequency / Urgency 2

P7 - Frequency / Urgency 3

P8 - Lack of sensitivity

P9 - Work out of the pelvic muscle

P10 - Augmentation of Endurance

P11 - Détente du muscle pelvien

P12 - Postnatal incontinence

P13 - Stress incontinence 3

P14 - Stress incontinence 4

P15 - Impulse incontinence 2

P16 - Impulse incontinence 3

P17 - Frequencyuria

P18 – Flaccid muscle

P19 - Weak pelvic muscle

Sports (21):

P1 - Warm-up

P2 - Active recovery

P3 - Stamina

P4 - Resistance 1

P5 - Resistance 2

P6 - Resistance 3

P7 - Resistance force 1

P8 - Resistance strength 2

P9 - Resistance strength 3

P10 - Strength 1

P11 - Strength 2

P12 - Strength 3

P13 - Max force 1

P14 - Max force 2

P15 - Max strength 3

P16 - Max strength 4

P17 - Explosive force 1

P18 - Explosive force 2

P19 - Fatigue resistance

P20 - Agonistic 1

P21 - Agonistic 2

Rehabilitation:

P1 – Muscle Growth

P2 - Spinal column

P3 - Paretic limbs

P4 - Facial paralysis 1 1

P5 - Facial paralysis 1 2

P6 - Muscle atrophy

P7 - Attacks 1

P8 - Attacks 2

P9 - Multiple sclerosis